top of page

Accessories

Description

A NMEA to Bluetooth Low Energy Gateway.

Easy to install, simple to use, data logger and compatible with iOS and Android.

  1. When used on a boat with no anemometer, it will allow you by itself to get all your current NMEA 0183 data on your smartphone via Bluetooth 4.0 (real time and export).  

  2. If you own one of our anemometers (CUPS 4.0 or ultrasonic portable), it will communicate the wind data to your boat’s NMEA 0183 network and displays. 

  3. It will also serve you as an anemometer repeater, extending the range some extra 20m.

CMI1004 NMEA to Bluetooth Converter

Specification

Bluetooth Version: 4.0. Range: Up to 20 m.

Data interfaces RS422.

Data format  NMEA0183.

Baud rate 4800/38400 (8n1)baud

Voltage range 6 - 28 V.

Consumption 50-100 mA.

Dimensions 80x40x20 mm. Cable: 30 cm.

Weight 55 grams.

Firmware Upgradable (Learn more). Current version: 0.44.

IP67 protection grade.

Easy mount 2 screws (Ø 3 mm).

Compatible with CUPS 4.0 & Ultrasonic portable

                     CMI1004

NMEA to Bluetooth Gateway

NMEA Connect Plus_Diagram.jpg

Data Gateway to NMEA2000/NMEA0183/WiFi/Bluetooth (BLE)

NMEA Connect Plus_pic.jpg

NMEA CONNECT PLUS

QI_Charger.jpeg

Inductive Charger for Portable Mini

Alumina Pole

High quality Aluminium

This Aluminium Pole consists of 3 parts: base, top and pole (Parts come together, no installation needed).

 

2 sizes availabe

  • 33 cm.

  • 100 cm.

 

Base compatible with standard VHF antenna mounts

1"-14 UNS thread (Ø 20 drill to allow wiring).

VHF antenna mount not included. Get your antenna mount on your preferred marine shop depending on your mount need and / or material (plastic, stainless steel):

  • Flat surface.

  • Horizontal bar.

  • Vertical bar.

  • Tilted bar.

  • Mast.

Top made it to fit Ultrasonic

M16x1,5 aluminium male thread (Ø 20 drill to allow wiring).

Carbon Pole

High quality Carbon Fiber

This Carbon Fiber Pole, has been engineered with best materials, made ​​entirely of high quality carbon fiber. It consists of 3 parts: base, top and pole (Parts come together, no installation needed).

 

3 sizes available

  • 33 cm.

  • 100 cm.

  • 200 cm (2 x 100cm. tubes with junction and top).

 

Base compatible with standard VHF antenna mounts

1"-14 UNS thread (Ø 20 drill to allow wiring).

VHF antenna mount not included. Get your antenna mount on your preferred marine shop depending on your mount need and / or material (plastic, stainless steel):

  • Flat surface.

  • Horizontal bar.

  • Vertical bar.

  • Tilted bar.

  • Mast.

Top made it to fit Ultrasonic

M16x1,5 aluminium male thread (Ø 20 drill to allow wiring).

bottom of page